Advertisement
Uninstallation & End-of-Life disposal instructions
1.
Be sure your hands are dry and wear non-conductive gloves, protective clothing, and shoes with
insulated soles
2.
Turn off the electrical supply before disconnecting Phantom Edge from LT panel
3.
Make sure, LT panel is de-energized, by using a tester. When an electric tester touches a live or
hot wire, the bulb inside the tester lights up showing that the respective wire is live. Check all the
wires, the outer metallic covering of the LT panel, and any other hanging wires with an electrical
tester before proceeding with your work.
4.
Uninstall the device in the following sequence:
i)
Remove voltage connections
ii) Remove cable ties used to tie up loose wires
iii) Remove ethernet connections (Optional)
iv) Remove RS232 connections (Optional)
v) Remove CT connections (Optional)
vi) Remove antennas from the device
vii) Remove the SIM from device
5.
Customer is responsible for proper disposal of the device at its end-of-life.
Bosch, as a component manufacturer shall adhere to meet regional and local
requirements in the design considerations of the component.
This component shall not be disposed of in a normal way but via separate collection of electronic
waste disposal system provided by your local authority. The life cycle of device with supported IMEI
number and ICC ID is the responsibility of the customer. The customer shall ensure that necessary
procedure is followed to manage IMEI of the device at the end-of-life, according to the mandatory
local regulations.
15
Advertisement
