Symbol LS 3000 Quick Reference page 4

Set Up
Slide locking nut down on cable. Insert cable into connector
on bottom of LS 3000. Twist locking nut counter-clockwise,
in the direction of the arrow, until fully engaged.
Connect the scanner to the host terminal, and be sure all the
connections are secure.
Scanning Made Easy
Ready
Before you use the scanner, make sure all cable connections
are secure.
Test
Aim the scanner away from you. Press the trigger; the scan
beam lights and the SCAN light on the back of the unit turns
on.
Scan
Make sure the bar code is in the correct scanning range. Aim
and press the trigger. The scanner has read the symbol when:
• You hear a beep.
• The green DECODE light appears.
• The laser turns off.
Quick Reference
3