Kohler AERODYNE K-3869T-S Installation Instruction page 5

Install plastic to ground and mounted
with 3 set of bolts (not supplied) firmly.
Connect flexible hose (not provided) to
fill valve.
Carefully align and lower the bowl.
Apply weight to the bowl rim to let the
outlet insert into plastic trap.
Carefully thread the screws into the
brackets, until toilet is secure.
Alternately tighten left and right sides
to prevent pulling the toilet off center.
Install cap to cover screw.
Do not overtighten.
Apply caulk around base.
The two holes at back of the toilet are
for the convenience of fill valve and
flexible hose installation in case of
1195897-T01-G
Fig.#8
8
Fig.#9
9
Outlet
Plastic Trap
Fig.#10
10
Cap Bushing
Screw
Fig.#11
11
Fig.#13
-5-
)
Fig.#12
12
13
3 (