Extent Of The Delivery; Function Description; Loading Procedure - Grizzly AGS 72 Lion-Set Translation Of The Original Instructions For Use

Cordless grass and shrub shear
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
GB

Extent of the delivery

Carefully unpack the appliance and check that
it is complete.
Dispose of the packaging material correctly.
-
Appliance with mounted shrub trimming
blade + blade guard
-
Grass trimming blade + blade guard
-
Telescopic shaft
-
Recharger
-
Instruction Manual

Function description

The cordless grass and shrub shear is a com-
bination unit with two interchangeable cutting
devices. These are coated with plastic (Teflon
non-stick coating) to prevent rust. For use as
a shrub trimmer, a double-sided blade block
is used as the cutting head. When cutting, the
blades oscillate linearly against an unsharp-
ened cutting plate. The catching blades are
round off at the side to prevent accidents, and
positioned in an offset arrangement to reduce
the risk of injury. A cutting head with several
blades is provided for use as a grass trimmer.
This also oscillates on a bladed plate, produc-
ing the same movement as a pair of scissors.
The unit is equipped with a telescopic shaft
and rollers for increased working speed and
comfort. Please read the following descriptions
for the function of the various controlling parts
of the unit.
24

Loading procedure

Do not expose the battery to ex-
treme conditions such as heat and
impact. There is a risk of injury
from leaking electrolyte solution! In
case of contact, rinse with water or
neutraliser and consult a doctor if
contact has occurred with eyes etc.
Charge the battery only in dry areas.
Do not switch on the equipment during
charging. There is a risk of injury from
electric shock.
In all cases, observe the applicable safety
information as well as the regulations and
directions for environmental protection.
Use the charger supplied to charge the Li-
ion battery installed in the equipment.
Before initial use, charge the battery in-
stalled in the equipment.
High storage/operating temperatures, high
charge/discharge currents and frequent
deep discharge will shorten the life of the
battery.
Defects resulting from improper handling
are not subject to the guarantee.
To check the state of charge:
To display the state of charge of the battery,
press the "Test" button on the state of charge
indicator (see summary, no. 1):
Battery full:
Red + yellow + green
light up
Battery half full:
Yellow + red light up
Battery empty:
Red lights up

Advertisement

Table of Contents
loading

Table of Contents