Table of Contents
Advertisement
2.3 Installing the second projector (Set B) - Setting up Set B
3.
Adjust the image size and position of Set B with the Z O O M, FOCUS and
LENS SHIFT features such that the image can be superimposed to the image
of Set A.
(Operating Guide
• Fine adjustment of the image size and position afterwards with
NOTE
f u n c t i o n s s u
c h
increase the image size. You must have the image of Set B completely
overlapping the image of Set A.
• When controlling Set B with the remote control, Set A may also respond to
the remote control. To avoid incorrect operations with the remote control, it
is recommended to operate with the control panel or a wired remote control.
KEYLOCK or REMOTE ID function is also available.
• If using Simple Stack, go to
4.
Display the menu with the MENU button.
menu
function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu appears on screen.
(Operating Guide
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display the
STACK MODE dialog.
Highlight MAIN with the ▲/▼ buttons, and
press the ◄ button to return to the previous menu.
7.
Use the ▲/▼ buttons to highlight LIGHT
MODE, and press the ► button to display
t h e LIGHT MODE dialog.
Highlight DUAL with the ▲/▼ buttons, and
press the ► button.
8.
After pressing the ► button, a dialog to
confirm whether or not to save the setting is
displayed.
Press the ► button to complete the setting.
( 20 )
→
a s KEYSTONE, PERFECT FIT and WARPING does not
For Simple Stack
→
OPTION
(continued)
Adjusting the
lens)
users. ( 12 )
(Operating Guide
menu)
9
Installation
→
Using the
QM00974-1
Advertisement
Table of Contents
