Inputting An Image To Sub; And Main Individually - Hitachi MP-WU8101W User Manual

4.2 Connecting signal cables
Inputting an image to Sub and Main individually
1.
Split the output signal from your image device into two with device such as a
signal splitter.
2.
Connect the output ports of the image output device to the same input ports
on the Main and Sub projectors.
NOTES for Intellectual Stack • LAN cannot be used as the input port on
the Main projector in Intellectual Stack.
NOTES for Simple Stack • Any ports compatible with the signal can be
used. Input the same signal to the two projectors individually.
(continued)
26
QM00974-1