Table of Contents
Advertisement
2.2 Installing the first projector (Set A) - Setting up Set A
4.
Display the menu with the MENU button.
menu
function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu appears on screen.
(Operating Guide
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display
t h e STACK MODE dialog.
Highlight SUB pressing the ▲/▼ buttons,
and press the ► button.
7.
After pressing the ► button, a dialog to
confirm whether or not to save the setting is
displayed.
Press the ► button to complete the setting. ( 20 )
• To avoid incorrect operations with the remote control, it is
NOTE
recommended to operate with the control panel or a wired remote control.
KEYLOCK or REMOTE ID function is also available.
→
OPTION
menu)
7
(continued)
(Operating Guide
Installation
→
Using the
QM00974-1
Advertisement
Table of Contents
