Siemens SCALANCE M804PB Operating Instructions Manual page 48

Connecting up
5.6 MPI/DP interface
Connecting to the automation system
1. Connect the supplied MPI cable to the SCALANCE M804PB and screw it tight.
2. Connect the other end of the MPI cable to the MPI/PG interface of your CPU and screw it
tight.
Note
The SCALANCE M804PB and the S7/M7/C7 system each represent a network device.
• In networks made up of 2 devices (SCALANCE M804PB and S7/M7/C7 system), the
• In networks made up of more than 2 devices, the SCALANCE M804PB is connected
48
SCALANCE M804PB is operated directly on the socket of the S7/M7/C7 system.
to the "PG socket" of a PROFIBUS connector (SINEC L2 bus connector). This does
not require any change to the setting of the terminating resistors.
Operating Instructions, 07/2018, C79000-G8976-C496-01
SCALANCE M804PB