Mitsubishi Electric MELSEC iQ-R Series User Manual page 37

Parameter settings of the GP-IB interface module (slave mode)
1.
Set "Basic settings" of the module parameters of the GP-IB interface module as shown below.
[Navigation window]  [Parameter]  [Module Information]  Module model name  [Basic settings]
2.
Write the set parameters to the CPU module. Then, reset the CPU module or power off and on the system.
[Online]  [Write to PLC]
Settings of GP-IB devices
For how to set GP-IB devices, refer to the manuals for the devices used.
7 COMMUNICATION EXAMPLES
7.2 Program Examples
7
35