Table of Contents
Advertisement
Quick Links
TABLE OF CONTENTS
FOR YOUR SAFETY --------------------------------------------------
SAFETY PRECAUTIONS --------------------------------------
SPECIAL NOTES ON LCD MONITORS -------------------
BEFORE YOU OPERATE THE MONITOR ---------------------
FEATURES --------------------------------------------------------
PACKING LIST ---------------------------------------------------
INSTALLATION INSTRUCTIONS ---------------------------
CONTROLS AND CONNECTORS --------------------------
ADJUSTING THE VIEWING ANGLE -----------------------
OPERATING INSTRUCTIONS -------------------------------------
GENERAL INSTRUCTIONS ----------------------------------
HOW TO ADJUST A SETTING ------------------------------
ADJUSTING THE PICTURE --------------------------------- 10
PLUG AND PLAY ----------------------------------------------- 11
TECHNICAL SUPPORT(FAQ) -------------------------------- 12-13
ERROR MESSAGE & POSSIBLE SOLUTION -------- 14
APPENDIX -------------------------------------------------------------- 15
SPECIFICATIONS ------------------------------------------ 15-16
FACTORY PRESET TIMING TABLE ---------------------- 17
CONNECTOR PIN ASSIGNMENT ------------------------- 18
41L1700-786-1B 英文
0
1
2
3
3
3
3
4
5
6
7
7
9
Advertisement
Table of Contents
Related Manuals for Acer AL707
Summary of Contents for Acer AL707
-
Page 1: Table Of Contents
TABLE OF CONTENTS FOR YOUR SAFETY -------------------------------------------------- SAFETY PRECAUTIONS -------------------------------------- SPECIAL NOTES ON LCD MONITORS ------------------- BEFORE YOU OPERATE THE MONITOR --------------------- FEATURES -------------------------------------------------------- PACKING LIST --------------------------------------------------- INSTALLATION INSTRUCTIONS --------------------------- CONTROLS AND CONNECTORS -------------------------- ADJUSTING THE VIEWING ANGLE ----------------------- OPERATING INSTRUCTIONS ------------------------------------- GENERAL INSTRUCTIONS ---------------------------------- HOW TO ADJUST A SETTING ------------------------------ ADJUSTING THE PICTURE --------------------------------- 10... -
Page 2: For Your Safety
Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 3: Safety Precautions
PRECAUTIONS Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. -
Page 4: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 5: Installation Instructions
INSTALLATION INSTRUCTIONS SWIVEL BASE IVEL BASE Install Figure 1 Installing and Removing the Swivel Base POWERCORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. -
Page 6: Controls And Connectors
SIGNAL CABLE Connecting the Signal Cable: the LCD monitor comes with a built-in signal cable. Plug the signal cable′s 15-pin connector into the computer's VGA port and tighten the two screws on the cable connector. Connecting the Power Cord: Plug the AC-power cord into the External Adapter. -
Page 7: Adjusting The Viewing Angle
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. -
Page 8: Operating Instructions
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. •... - Page 9 FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • MENU / ENTER : Active OSD menu or function adjust confirm or Exit OSD menu when in Brightness/Contrast OSD status. • Contrast Adjust contrast or function adjust. •...
-
Page 10: How To Adjust A Setting
NOTES • Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock. • Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. -
Page 11: Adjusting The Picture
ADJUSTING THE PICTURE The descriptions for function control LEDS Contrast Brightness Focus Clock H. Position V. Position Auto Center Language Dos-mode selected Green Blue (Warm) Color (Cool) Color Reset Exit Notice: for “Dos-mode selected” function ,after selected the icon MENU to confirm the selection , press 640x400 , press MENU again to confirm and then press POWER button off then on for activate the setup (for general, most of the Dos mode was set in 720x400@70Hz). -
Page 12: Plug And Play
PLUG AND PLAY Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. -
Page 13: Technical Support(Faq)
TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play Picture is fuzzy Picture bounces or a wave pattern is present in the picture The power LED is ON (orange) but there’s no video or no picture. - Page 14 Screen image is not centered or sized properly. Picture has color defects (white does not look white) Poor brightness or contrast Horizontal or vertical disturbances on the screen CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width.
-
Page 15: Error Message & Possible Solution
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table. -
Page 16: Appendix
APPENDIX SPECIFICATIONS Driving system LCD Panel Size Pixel pitch Brightness Contrast Viewable angle Video Input H-Frequency V-Frequency Display Colors Dot Clock Max. Resolution Plug & Play ® EPA E ON Mode NERGY OFF Mode Input Connector Input Video Signal Maximum Screen Size Power Source Environmental Considerations... - Page 17 Switch External Controls: Functions Power Consumption ( Maximum ) Regulatory Compliance 41L1700-786-1B 英文 • Auto Adjust Key • / Brightness • / Contrast • Power Button • MENU/ Exit • Contrast • Brightness • Focus • Clock • H. Position •...
-
Page 18: Factory Preset Timing Table
Preset Display Modes RESOLUTION STANDARD Dos-mode 640 × 400 Dos-mode 640 × 350 Dos-mode 720 × 400 640 × 480 640 × 480 640 × 480 640 × 480 800 × 600 800 × 600 SVGA 800 × 600 800 × 600 832 ×... -
Page 19: Connector Pin Assignment
CONNECTOR PIN ASSIGNMENT 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION Green Blue Ground Ground R-Ground G-Ground B-Ground 41L1700-786-1B 英文 PIN NO. DESCRIPTION Detect Cable Ground DDC-Serial Data H-Sync V-Sync DDC-Serial Clock...