Lexus RX400h Towing And Road Service Manual page 6

NOTE: The eyebolt on this model has RIGHT-HAND THREADS. Screw the eyebolt
clockwise into the front pull point and attach the winch line to the eyebolt with the open
side of the hook facing upward. (See Figure 2)
F
igure 2
Before loading, ensure that the transmission is in "Neutral" and the ignition switch is in
position to unlock the steering. When loading, remember that the eyebolts are designed
for a straight ahead pull within a 20 degree window, so stop the vehicle as the winch wire
rope begins to pull downward. To prevent too much downward pull, you will need to
keep the leading edge of the RX400h, 3 feet or more from the winch drum
Once loaded, set the parking brake and secure the vehicle onto the carrier.
NOTE: Lexus states that the four tie-downs slots in the frame can be used to secure the
vehicle. Slots are provided in the frame to take either "T" or "mini-J" type hooks. (See
Figures 3 and 4). AAA recommends the use of wheel strap tie-downs around each wheel
to assist in preventing damage to sensitive under body and suspension components.
6