1-2-4. Camera Cabinet (Upper/Lower)
1. Remove the pan cabinet (side). (Refer to Section 1-2-1)
2. Remove the pan cabinet (front). (Refer to Section 1-2-2)
3. Remove the pan cabinet (rear). (Refer to Section 1-2-3)
4. Remove one screw, then remove the camera cabinet
(the upper first, then the lower) in the direction
indicated by the arrow.
Camera cabinet (upper)
Projections
Camera cabinet (front)
Groove
5. Attach the camera cabinet (upper/lower) in the reverse
order of steps 1 to 4.
n
When attaching, make sure to firmly insert the six
projections of the camera cabinet (upper/lower) into the
groove of the camera cabinet (front).
EVI-D100/EVI-D100P
M 2
Projections
Projections
Camera cabinet (lower)
1-2-5. Camera Cabinet (Front)
1. Remove the pan cabinet (side). (Refer to Section 1-2-1)
2. Remove the pan cabinet (front). (Refer to Section 1-2-2)
3. Remove the pan cabinet (rear). (Refer to Section 1-2-3)
4. Remove the camera cabinet (upper/lower). (Refer to
Section 1-2-4)
5. Remove the two screws fixing the camera cabinet
(front), then remove the camera cabinet (front) in the
direction indicated by the arrow A.
Camera cabinet
(front)
M 2
B
A
M 2
6. Attach the camera cabinet (front) in the reverse order
of steps 1 to 5.
n
When attaching, tighten the two screws while pushing the
camera cabinet (front) as far as it will go in the direction
indicated by the arrow B.
1-3