Table of Contents
Advertisement
•
Push the ZERO button to zero the pressure sensor when
vented to atmospheric pressure.
•
Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures that
exceed the battery manufacturer's specifications. If the
batteries are not removed, battery leakage can damage the
Product.
•
Replace the batteries when the low battery indicator shows
to prevent incorrect measurements.
•
Be sure that the battery polarity is correct to prevent battery
leakage.
•
Repair the Product before use if the battery leaks.
•
The battery door must be closed and locked before you
operate the Product.
•
Use only specified replacement parts.
Symbols
Symbols used on the Product or in this manual are shown in Table 1.
Symbol
Risk of Danger. Important information. See
Manual.
Hazardous voltage. Risk of electric shock.
Conforms to European Union directives.
Inspected and licensed by TÜV Product
Services.
This product complies with the WEEE
Directive (2002/96/EC) marking
requirements. The affixed label indicates that
you must not discard this electrical/electronic
product in domestic household waste.
Product Category: With reference to the
equipment types in the WEEE Directive
Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation"
product. Do not dispose of this product as
unsorted municipal waste. Go to Fluke's
website for recycling information.
Table 1. Symbols
Description
Symbol
Description
Conforms to relevant North
American Safety Standards.
Double Insulated
Conforms to relevant Australian
EMC standards.
Battery
Conforms to relevant South
Korean EMC Standards.
Pressure Calibrator
Symbols
3
Advertisement
Table of Contents
