Suspend Mode - Acer AcerNote 950 User Manual

2.5.4

Suspend Mode

In suspend mode the system power shuts off. The system saves all system
information onto the hard disk before it enters suspend mode. The system
restores this information and resumes where you left off upon leaving
suspend mode.
A necessary condition for the system to enter suspend mode is that the
reserved space for saving system information on the hard disk must be
larger than the combined system and video memory size.
conditions, the system standby/suspend button acts as the suspend button.
See Appendix D for information on the PHDISK utility.
In this situation, there are three ways to enter system suspend mode:
Press the standby/suspend button (
Set a value for the System Standby/Suspend Timer in Setup. If the
waiting time specified by this time elapses without any system activity,
the system goes into suspend mode
Enable the Standby/Suspend upon Battery-low parameter in Setup. If a
battery-low condition takes place, the system enters suspend mode in
about five minutes. See section 2.7.
When the system enters suspend mode,
the CPU switches off,
the LCD switches off,
the power going to the keyboard, mouse and disk drives shuts off,
and the system powers off the parallel and serial ports
To exit system suspend mode, press the power switch (
standby/suspend button (
If the system is connected to a pocket ethernet adapter, note
that the network does not resume its function after the system
returns to normal operating mode.
2-14
)
).
Under such
) or the
User's Manual