Advertisement
Product assembly
Swirl Bed - Kingsize
803 58802
Step 1
Parts, fittings and tools
1
2
3
A
B
Carefully place the headboard (1), footboard (2) and one of the side rails (3) near where the product will be used.
Locate plastic gasket (G) and place between the headboard and side rail, aligning the holes as in the image above.
Fix the side rail to the headboard using large allen bolts (A), washer (B) with allen key (F) through the aligned holes,
do not fully tighten the bolts at this stage. Repeat this step to fix the side rail to the footboard.
Finally, repeat this process again to secure the remaining side rail to the other side of the headboard and fooboard.
Step 2
Parts, fittings and tools
5
3
C
E
Locate the support rails (5) at the ends of each side rail (3) and secure using small allen bolts (C) with allen key (E).
Now fully tighten all the allen bolts from steps 1 and 2 using the allen keys.
10/09/20
F
G
5
1
3
5
G
A
B
3
2
C
E
F
Advertisement
