Table of Contents
Advertisement
44
When I type on my cordless keyboard, the text is
displayed on another keyboard using a cordless desktop
system. What can we do to break the interference?
This also is considered cross talk, and the above solutions
apply. However, one step that should be tried before the
steps mentioned above is to remove the batteries for 15
minutes. Then insert them and boot the computer up. It is
important that during this time, you do not press the
"Connect"
button on the front panel or keyboard of
the other cordless desktop system.
When I move my cordless mouse the user next cannot
move the cursor on their system until I stop moving my
mouse. What should I do?
This is called "Jamming" and occurs when one cordless device
is in use and causes another cordless device to stop
functioning until the first device stops moving. To avoid
possible interference, try to keep the distance between
systems at least 10 feet. Also, moving the mouse closer or
further away to your system can also improve transmission
and performance. If the above fails, try pressing and holding
the "Connect"
button on the front panel for 10 seconds.
This will reset the receiver's connection information and
allow you to do a first time connection with the receiver and
mouse or keyboard. After holding the Connect button for 10
seconds, then press the "Connect"
button on the bottom
of the mouse to synchronize it with the receiver. If you have a
cordless keyboard instead of, or in addition to, a cordless
mouse, press the "Connect"
button on the front panel
again, then press the "Connect " button on the
Keyboard.
I put a CD in my DVD player, and press the "Play/Pause"
key, but nothing happens. Why?
In order to use the multimedia keys for your DVD player, you
must launch the DVD player first.
Advertisement
Table of Contents
Troubleshooting
