Table of Contents
Advertisement
Record TV programs
1
Be sure that your TV Tuner card (or capture card) is
installed correctly or your PowerVCR screen will be blank.
2
Start PowerVCR. Click the source indicator until the indi
cator reads TV if you have an antenna or CATV if you
have a cable wire.
3
Click the arrow located on the right edge of the
PowerVCR panel to activate the TV Tuner Control.
4
Select a desired channel by using the number pad or left
and right arrows.
5
Click on Return to return to the last channel.
6
Click Auto Scan to scan all the possible channels. To
cancel the scanning, click Cancel once the Auto Scan
dialog box appears and you will be returned to the
original channel.
7
After you have selected the desired channel, click Record.
8
Click Stop when you are finished.
9
The playlist will appear for you to save it.
10
To delete all the file(s), click Delete.
11
Click OK when the dialog box appears to confirm your
deletion.
12
Click on Save to... to save it to another folder other than
the default folder.
13
A dialog box will appear for you to save it in another
folder or to rename it. Click Save when you are finished.
31
Advertisement
Table of Contents
Troubleshooting
