Table of Contents
Advertisement
1.4
Pre-installation Instructions
Always observe the following before you install a system component:
Turn off the system power and all the peripherals connected to the
1.
unit before opening it.
Open the system according to the instructions in the housing
2.
installation manual.
Follow the ESD precautions in section 1.3 before handling a
3.
system component.
Remove any expansion boards or peripherals that block access to
4.
the DIMM sockets or CPU socket.
See the following sections for specific instructions on the
5.
component you wish to install.
Do not attempt the procedures described in
the following sections unless you are a
qualified service technician.
System Board
1-5
- Quick Links:
- System Board Layout
Hide quick links:
Advertisement
Table of Contents
