Table of Contents
Advertisement
4. Connect the 3-pin cable to JPX1 and the 2-pin cable to JP8 on the system
board.
Figure 4-19 Connecting the heatsink cables to the system board
The heatsink becomes very hot when the
system is on. NEVER touch the heatsink with
any metal or with your hands.
To insure proper installation, remove any DIMM
from their sockets before installing or removing the
CPU.
See section 4.6.2 for instructions on
removing a DIMM.
JP8
Chapter 4 - Installing Optional Components 4-19
JPX1
Advertisement
Table of Contents
