Error Code Table - Panasonic SA-AK180PN Service Manual

6.6.

Error Code Table

Self-Diagnosis Function (refer Section "6." Service Mode Table 1") provides information on any problems occurring for the unit and
its respective components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held
unless it is cleared.
The error code is automatically display after entering into self-diagnostic mode.
6.6.1. CR14C Mechanism Error Code Table
Error Code Diagnosis Contents Description of error
LOAD Load operation faulty The load operation cannot
UNLD Unload operation
faulty
UP Exchange open
operation faulty
DOWN Down operation faulty The down operation cannot
OPEN Open operation faulty The open operation cannot
CLOSE Close operation faulty The open operation cannot
MODEL Mode change to
updown operation
faulty
Error Code Diagnosis Contents Description of error
MODEH Mode change to
horizontal operation
faulty
INITIALIZE Initialize operation
faulty
complete when time out
occurs.
The unload operation
cannot complete when time
out occurs.
The exchange open
operation cannot complete
when time out occurs.
complete when time out
occurs.
complete when time out
occurs.
complete when time out
occurs.
The mode change to
updown operation cannot
complete when time out
occurs.
It changes to
up/down.
The mode change to
horizontal operation cannot
complete when time out
occurs.
The initialize operation
cannot complete.
Automatic FL Display
Automatic FL Display
23
Remarks
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
Remarks
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.
For DVD Mechanism unit (CR14).
Press [EXCHANGE] on main unit for
next error.