Doctor Mode Summary Table [Cd Mechanism Unit (Cr14C)] - Panasonic SA-AK180PN Service Manual

6.2.2. Doctor Mode Table 2
Item
Mode Name
Cold Start To active cold start upon next AC
power up when reset start is execute
the next time.
Clock Setting To indicate that a clock time was set
Check properly.
Volume Setting
To check the volume setting of a main
Check
unit.
Operation keys
FL Display and all LED shall be all OFF.
& all segment
When the keys of the main set are
display check
pressed,the various corresponding grids
mode
and segments of the FL display shall light
up in any sequence.When all the keys are
pressed and detected, all segment
and LED will ON.
To check the FL segment display
FL Display
Check (All segment will light up).
CR14
To check the function operation of
Inspection
mechanism unit
6.3.

Doctor Mode Summary Table [CD Mechanism Unit (CR14C)]

Main buttons Remote control unit buttons
[STOP] + [ /FF/ ]
[1] [ Open Close]
In Self Diagnostic Mode
Description
- Self-Diagnostic Mode.
- Service Mode.
[1] Reliability 1 (Load)
[2] Reliability 2 (Cycle)
[3] Reliability 3 (Combi)
FL Display
Press [7]: VOLUME50
Press [8]: VOLUME35
Press [9]: VOLUME27
Press [>10]: VOLUME0
Application
18
Key Operation
Front Key
In Doctor mode:
1. Press [4] button on
remote control.
To exist, press [ok] button on
remote control or press
[ /I, POWER] button on main
unit or remote control.
In Doctor mode:
1. Press [MUTE] button on
remote control.
In Doctor mode:
1. Press [7],[8],[9],[>10]
button on remote control.
Volume
In Doctor mode:
1. Press [3] button on
remote control.
To exist, press [ok] button on
remote control.
In Doctor mode:
1. Press [2] button on
remote control.
To exist, press [ok] button on
remote control or press
[ /I, POWER] button on main
unit or remote control.
In Doctor mode:
1. Press [DISC] button on
remote control.
To exist, press any key
(Refer to the section "6.4
Service Mode Table [CD
Mechanism Unit
(CR14C)]" for more infor-
mation.)
Note