Page 1
Y9357 Y9357 Y9357 Please keep this instruction sheet for future reference, Please keep this instruction sheet for future reference as it contains important information. Adult assembly is required. Tool required: Phillips screwdriver (not included) Wipe this toy with a clean, damp cloth. Do not immerse.
Page 2
Assembled Parts 2 Small Flags Large Flag Wall Base Small Flag Rack Large Flag Rack Upper Track 2 Canopies Lower Track Lower Track 2 Stands 2 St M3,5 x 12mm Screw – 2 SHOWN ACTUAL SIZE Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten.
Page 3
Assembly Canopies CAUTION This package contains small parts. For adult assembly only. Stands • Fit the canopies into the stands. Push to “snap” each into place. Hint: Each canopy is designed to fit a stand one way. If it does not seem to fit, try the other canopy.
Page 4
Assembly Base • Fit the wall assembly into the base and push to “snap ” in place. Lower Ramp Lower Support Ramp Tab • First fit the support on the lower ramp over the support on the base and push to “snap”...
Page 5
Assembly Upper Ramp Tab • Fit the tab on the upper ramp into the slot in the lower ramp. Push to “snap” in place. • Insert two screws into the upper ramp and tighten.
Page 7
Assembly Large Flag • Fit the large flag onto the roof. Small Flag Small Flag • Fit a small flag onto each canopy.
Page 8
Decoration Apply labels exactly as shown in illustrations. Avoid repositioning a label after it has been applied.
Page 9
“Klip-klop” Down the Ramp! • Place a horse figure on the ramp and tap his tail. Watch him “klip-klop” down the ramp and knock down the targets! Tips for Use • For best performance, place the toy on a flat, level surface. •...