GE AF-650 GP Programming Manual page 115

Parameter Descriptions
PB-64 Device Identification
Range:
0 [0 - 0] This parameter shows the device identification.
*
Refer to the AF-650 GP & AF-600 FP PROFIBUS DP
Operating Instructions, DET-624 for further
3 3
explanation.
PB-65 Profile Number
Range:
0 [0 - 0] This parameter contains the profile identification.
*
Byte 1 contains the profile number and byte 2 the
version number of the profile.
PB-67 Control Word 1
Range:
0 [0 - 65535] This parameter accepts the Control Word from a
*
PB-68 Status Word 1
Range:
0 [0 - 65535] This parameter delivers the Status Word for a
*
PB-70 Edit Set-up
Option:
[0] Factory setup
[1] Set-up 1
*
[2] Set-up 2
[3] Set-up 3
[4] Set-up 4
[9] Active Set-up
PB-71 Profibus Save Data Values
Option:
[0] Off
*
[1] Store edit
setup
[2] Store all
setups
114
Function:
Function:
Function:
Master Class 2 in the same format as PCD 1.
Function:
Master Class 2 in the same format as PCD 2.
Function:
Function:
Parameter values changed via PROFIBUS are not
automatically stored in non-volatile memory.
Use this parameter to activate a function that
stores parameter values in the EEPROM non-
volatile memory, so changed parameter values
are retained at power-down.
Deactivates the non-volatile storage function.
Stores all parameter values for all set-ups in the
non-volatile memory. When all parameter values
have been stored, the selection returns to [0]
Off.
Stores all parameter values for all set-ups in the
non-volatile memory. When all parameter values
have been stored, the selection returns to [0]
Off.
PB-72 ProfibusDriveReset
Option:
[0] No action
*
[1] Power-on
reset
[2] Power-on
reset prep
[3] Comm
option reset
PB-75 DO Identification
Range:
0 [0 - 65535] Provides information about the DO (Drive
*
PB-80 Defined Parameters (1)
Array [116]
No keypad access
Read only
Range:
0 [0 - 9999] This parameter shows a list of all the defined
*
PB-81 Defined Parameters (2)
Array [116]
No keypad access
Read only
Range:
0 [0 - 9999] This parameter shows a list of all the defined
*
PB-82 Defined Parameters (3)
Array [116]
No keypad access
Read only
Range:
0 [0 - 9999] This parameter shows a list of all the defined
*
02/2016 All rights reserved.
Function:
Resets the frequency converter after power-
up, as for power-cycle.
Resets the PROFIBUS DP option only. This is
useful after changing certain settings in
parameter group PB-##, for example,
parameter PB-18 Node Address.
When reset, the frequency converter
disappears from the Network, which may
cause a communication error from the master.
Function:
Object).
Function:
frequency converter parameters available for
PROFIBUS.
Function:
frequency converter parameters available for
PROFIBUS.
Function:
frequency converter parameters available for
PROFIBUS.
DET-618D