Napoleon Luxuria Series Installation Manual page 70

finishing
EN
To remove GGA
1. To open, release the latches from the GGA using the release
tool. Push the release tool against bottom of latch until it
disengages from GGA. Pull gently on GGA while releasing
the latch.
3. Remove the screws and washers securing the GGA to the
GGA slider brackets (1 per corner, 4 total).
70
W415-1710 / B / 08.17.18
2. Pull both sides of GGA keeping it parallel to the
appliance.
4. Carefully lift the GGA up and off the GGA slider brackets
(2 per side). Set assembly on a clean, soft surface. Care
must be taken to protect the edges of glass.