3.3 Installation
Three steps for easy alignment
◎
1. Align one beam first, so that the corresponding indicator (blue) lights up.
2. Then align the other beam so that the alignment indicators (blue) on both sides are lit at the same time.
3. Rotate area sensor to change the operation indicator from red to green.
Step 1
Installation instructions not affected by the mirror
◎
Safe installation distance
Detection distance X
< 3m
> 3m
Transmitter
Operating Manual for Communicating Area Sensor
Chapter 3 Installation and Operation
Minimum installation distance Y
Detecting
distance X
Receiver
Minimum installation
distance Y
Mirror
Step 2
0.262 m
X * tan5˚
Minimum installation
distance Y
Receiver
Step 3
Mirror
5˚
Detection
distance X
Transmitter
3-3