Table of Contents
Advertisement
5019_102_00273_INSTAL_GB
Service specifications - double models
WATER CONNECTION
Recommended COLD (Maximum 60°C).
3/4 " BSP (GB20) to suit flat washer.
WATER SOFTENER MODELS
Refer to your
WATER PRESSURE
Water Softener Models
Other Models
DRAIN CONNECTION
Drain Hose Joiner to suit Ø19mm ± 2mm waste tee.
ELECTRICAL CONNECTION
220-240 VAC power outlet, 9 Amps Minimum.
LENGTH OF SERVICES (FROM PRODUCT EXIT POINT)
Drain hose - 2250mm
Inlet hose - 1750mm
Power supply cord - 1965mm
NOTE: Services approximately exit product 189mm from left; 550mm from front; 793mm from top.
Prefinished model shown
* For an Integrated
** Depth of product excludes Curvature (30mm), or Handle.
† TOE KICK DEPTH
67mm less the Toe Kick Panel thickness (Minimum Panel thickness using the supplied screws is 9mm).
# DOOR FRONT HEIGHT
719.5mm minimum.
30-05-2007
13:25
R
User Guide on how to set up your water softener.
Maximum
1000kPa (145 p.s.i.)
1000kPa (145 p.s.i.)
570mm
2mm
#
Tabs
Side View
the product depth is specified with an 18mm Integrated Panel thickness.
R
Pagina 8
Minimum
100kPa (14,5 p.s.i.)
30kPa (4,3 p.s.i.)
595mm
*
520mm
Drawer Open
67mm
8
Advertisement
Table of Contents
