Using The On-Screen Menus - Ask Proxima M2+ User Manual

U s i n g t
NOTE: Some menu items may be
grayed out (dimmed) at certain
times. This indicates the item is
not applicable to your setup or the
item is not enabled until another
selection is made.
20
h e P r o
Blank
Press this button to
image.

Using the On-Screen Menus

The projector has menus that allow you to make image adjust-
ments and change a variety of settings.
To open the on-screen menus, press the
keypad or remote. This displays the
and
Keystone
buttons. Press the down arrow button to move the cursor down
and press the up arrow button to move the cursor up. The
selected menu is highlighted.
F 15
IGURE
On-screen menu
To change a menu setting, use the up and down arrow buttons to
move the cursor up and down to the item you want to change
(the selected item is highlighted), then press the
Use the arrows to adjust the setting or to turn a setting on or off.
Press
Select
To access a sub-menu, highlight it and press
back to the previous menu, highlight the arrow at the top of the
menu and press
Use the up and down arrows to move to another setting. When
you have completed your adjustments, press
menus.
j e c t o r
display a blank screen instead of the current
buttons on the keypad to menu navigation
Volume
when you are done.
.
Select
button on the
Menu
menu and changes the
Basic
button.
Select
. To navigate
Select
to close the
Menu