Ask Proxima Impression A6+ User Manual page 13

USER GUIDE
3. SOUND.
The GA cable has a sound input branch at the projector end. Connect
sound from the computer using a standard 3.5 mm stereo jack line cable
(not supplied).
4. MOUSE.
To enable mouse control from the remote control, a connection is made
using a mouse cable and various adapters. Connect the cable directly to
the MOUSE connector on the projector. Connect the appropriate
adapter to the free end of the mouse cable at the computer end as
described below.
SERIAL (RS 232). Use the serial adapter with a branch for the
local computer mouse. The serial adapter is fitted with a 9 pin
DSUB connector. Use an extra 9 to 25 pin adapter (available
from your dealer) if your computer has a 25 pin serial
connector. Connect your computer mouse to the free branch of
the adapter if desired. With some computers, the branched
adapter may not work. For this purpose, an optional straight
serial adapter is available.
PS/2. Use the PS/2 adapter that connects directly to your
computer mouse port. Running the computer mouse in parallel
is not possible, unless your computer itself has provision for
two mice simultaneously. You may consider using the above
serial adapter and run your mouse on the serial port instead, in
order to be able to run your local mouse in parallel. This will
require a different mouse driver setting. Please consult your
computer documentation or local dealer for details.
MAC. Use the MAC mouse adapter to connect to the mouse
port on your MAC computer.
5. MAINS POWER.
Connect the mains cord to the projector and all other equipment in the
set-up.
6. SWITCH ON the projector first, then the computer. It is important to
switch the projector on first in order for correct detection of the projector
as a display and mouse peripheral device to the computer.
XGA LCD PROJECTOR
13