Mazda CX-9 2019 Owner's Manual page 443

®
Bluetooth
▼ Device pairing
®
To use Bluetooth audio and Hands-Free,
the device equipped with Bluetooth
to be paired to the unit using the following
procedure. A maximum of 7 devices
including Bluetooth
hands-free mobile phones can be paired.
NOTE
®
The Bluetooth system may not operate

for 1 or 2 minutes after the ignition is
switched to ACC or ON. However, this
does not indicate a problem. If the
®
Bluetooth system does not connect
automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth
setting on the device is normal and
attempt to reconnect the Bluetooth
device from the vehicle side.
®
If Bluetooth -enabled devices are used

in the following locations or conditions,
connection via Bluetooth
possible.
The device is in a location hidden

from the center display such as behind
or under a seat, or inside the glove
compartment.
The device contacts or is covered by a

metal object or body.
The device is set to power-saving

mode.
Pairing Procedure
1. Select the icon on the home screen
to display the Settings screen.
2. Select the
3. Select .
Preparation
®
has
®
audio devices and
®
®
may not be
tab.
4. Turn the Bluetooth
5. Select
message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth
device).
7. Select "Mazda" from the device list
searched by the device.
8. (Device with Bluetooth
Input the displayed 4-digit pairing
code into the device.
(Device with Bluetooth
or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the
Connection permission and phonebook
access permission for your mobile
®
device may be required depending on
the mobile device.
9. If pairing is successful, the functions
of the device connected to Bluetooth
are displayed.
10. (Devices compatible with Mazda
E-mail / SMS function)
SMS (Short Message Service)
messages, and E-mail for the device
are downloaded automatically. A
download permission operation for
your device may be required
depending on the device.
NOTE
When Call history and messages are

downloaded automatically, each
automatic download setting must be on.
Refer to Communication Settings on
page 5-74.
Interior Features
Audio Set
®
setting on.
to display the
®
device (Peripheral
®
version 2.0)
®
version 2.1
.
5-53
®