Door Locked Indicator Light; Kg Detector; Key Lock Indicator Light; Options Indicator Lights - Candy WashPass Manual

3) DOOR LOCKED INDICATOR LIGHT

l
The indicator light is illuminated when the
door is fully closed.
Close the door BEFORE selecting the
PLAY/PAUSE button.
l
When PLAY/PAUSE
the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door in
the proper way
PLAY/PAUSE button.
l
Wait until the DOOR LOCKED light has
gone out before opening the door.
4) Kg Detector (function active only on
certain programmes)
l
During the first minutes of the cycle, the
"Kg Detector" indicator remain on while
the intelligent sensor will weigh the
laundry and adjust the cycle time, water
and electricity consumption accordingly.
l
Through every wash phase "Kg Detector"
allows to monitor information on the wash
load in the drum and in the first minutes
of the wash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of
fabric selected to be washed it;
- adjusts the rhythm of drum rotation for
the type of fabric being washed;
- recognizes the presence of lather,
increasing, if necessary, the amount of
water during rinsing;
- adjusts the spin speed according to the
load, thus avoiding any imbalance.
is pressed on
and press the

5) KEY LOCK INDICATOR LIGHT

The indicator light show that the keys are
locked.

6) OPTIONS INDICATOR LIGHTS

The indicator lights show the option that
can be selected by the relevant button.
7) STAIN LEVEL INDICATORS LIGHTS
l
Once the programme has been selected,
the indicator light will automatically show
the stain level set for that programme.
l
Selecting a different stain level the
relevant indicator will light up.
8) STEAM INDICATOR LIGHT
The indicator light shows the selection of
the relevant option.
9) Wi-Fi INDICATOR LIGHT
l
On models equipped with Wi-Fi, it
indicates the status of the connection. It
could be:
- FIXED ON: remote control enabled.
- SLOW FLASHING:
disabled.
- QUICK FLASHING FOR 3 SECONDS,
THEN OFF: the machine cannot connect
to the home Wi-Fi network or has not yet
been enrolled on the App.
- SLOW BLINKING FOR 3 TIMES, THEN
OFF FOR 2 SECONDS: reset of the Wi-Fi
network (during enrollment on the App).
- ON FOR 1 SECOND, THEN OFF FOR 3
SECONDS: the door is open. Remote
control cannot be activated.
l
For all the
functionality and the instructions for an
easy configuration of the Wi-Fi, please
refer to: go.he.services/zp
16
remote control
information about the