Emerson Wireless 1410 Gateway Reference Manual page 67

Reference Manual
00809-0200-4410
Special Conditions for Safe Use(X)
1. The equipment must be installed in an area of not more than Pollution Degree 2 as
2. External connections to the equipment must not be inserted or removed unless
3. The equipment is not capable of withstanding the 500 V electrical strength test as
4. When fitted, the surface resistivity of the remote antenna is greater than 1 GΩ. To
B.5.4 International
N7 IECEx Type n
Certificate
Standards
Markings
Special Conditions for Safe Use(X)
1. The equipment must be installed in an area of not more than Pollution Degree 2 as
2. External connections to the equipment must not be inserted or removed unless
3. The equipment is not capable of withstanding the 500 V electrical strength test as
4. When fitted, the surface resistivity of the remote antenna is greater than 1 GΩ. To
Note
Currently not available for Emerson 1410D option.
Emerson.com/Rosemount
defined in IEC 60664-1, and in an enclosure that provides a degree of protection of
at least IP54 and meets the relevant requirements of EN 60079-0 and EN 60079-15.
either the area in which the equipment is installed is known to be non-hazardous, or
the circuits connected have been de-energised.
defined in clause 6.5.1 of EN 60079-15: 2010. This must be taken into account
during installation.
avoid electrostatic charge build up, it must not be rubbed with a dry cloth or
cleaned with solvents.
IECEx BAS 14.0067X
IEC 60079-0: 2011, IEC 60079-15: 2010
Ex nA IIC T4 Gc, T4(-40 °C ≤ T
defined in IEC 60664-1, and in an enclosure that provides a degree of protection of
at least IP54 and meets the relevant requirements of EN 60079-0 and EN 60079-15.
either the area in which the equipment is installed is known to be nonhazardous, or
the circuits connected have been de-energised.
defined in clause 6.5.1 of EN 60059-15: 2010. This must be taken into account
during installation.
avoid electrostatic charge build-up, it must not be rubbed with a dry cloth or
cleaned with solvents.
Product Certifications
≤ +75 °C), V = 30 Vdc
a MAX
September 2020
67