Cornelius VIPER Installation Instructions Manual page 2

Viper Faceplate Spacer Kit Installation
FACEPLATE SPACER INSTALLATION
NOTE: Install Faceplate Spacers to prevent potential barrel damage and align the Faceplate evenly
on the barrel's 4 threaded rods. The Faceplate Spacers are part of a kit or can be acquired
individually; see below for all available configurations.
P
ART NUMBERS OF ALL AVAILABLE CONFIGURATIONS
KIT Part List
:
Sl. No.
1.
2.
3.
4.
Please contact Marmon Link at 1-800-238-3600 with questions regarding the purchase of Faceplate Spacers.
U P
NIT REPARATION
Step
1. Defrost the barrel and purge the product.
2. When purging is complete, disconnect power from the unit.
Open the relief valve on the front of the barrel to ensure that pressure is released.
3.
NOTE: BARREL PRESSURE MUST BE RELIEVED BEFORE REMOVING THE
Remove the four (4) 3/4 in. nuts from the faceplate and slowly remove the faceplate
4.
from the unit.
Publication Number: 629097945INS
Instructions
Part No.
629097945-2 2 Flavor Faceplate Spacer Kit
629097945-3 3 Flavor Faceplate Spacer Kit
629097945-4 4 Flavor Faceplate Spacer Kit
620072813 - Individual Part Number
F F
OR ACEPLATE
FACEPLATE!
:
Table 1.
Description
S U
PACER PGRADE
Table 2.
Action
- 2 -
:
© 2020, Cornelius Inc.