Resetting Filter Timer Indicator - Hunter AirMax HP980 Instructions Manual

Operating Your Air Purifier
Press the Auto button to turn on Auto Mode. Auto Mode
Auto
automatically adjusts fan speed based on air quality. If air quality is
good (low VOC and particle levels) Low Speed is used. If air quality
is bad (high VOC and particle levels), Turbo Speed is used.
Light Press the accent light button to turn the light on or off.
Air Quality Your air purifier is programmed to indicate the VOC and Particle
levels in your indoor environment. A green light indicates good air
quality (low VOC and particle levels). A red light indicates bad air
quality (high VOC and particle levels). If light is red, we recommend
turning your air purifier to Turbo or Auto Mode.
RESETTING FILTER TIME INDICATOR
Pre-Filter Your Hunter
Replacement the pre-filter after 6 months, based on continuous use
Indicator (approximately 3,500 hours). The indicator is only a guide.
Depending on air quality and environmental factors, pre-filter may
need to be replaced more frequently. After pre-filter is replaced,
press and hold the pre-filter indicator button for 3 seconds. The
unit will beep 3 times to indicate reset.
HEPA Your Hunter
Replacement the HEPA filter after 12 months, based on continuous use
Indicator (approximately 7,000 hours). This indicator is only a guide.
Depending on air quality and environmental factors, HEPA filter
may need to be replaced more frequently. After filter is replaced,
press and hold the HEPA filter indicator button for 3 seconds. The
unit will beep 3 times to indicate reset.
air purifier is programmed to remind you to replace
®
air purifier is programmed to remind you to replace
®
6