Summary of Contents for Swann Smiths Caspian Skyline E
Page 1
Caspian Skyline ® Installation, commissioning and user manual Skyline E 4kW - SLVT B Issue 003 | January 2021 ENGLISH | UK | IRL | SmithsEP.co.uk Issue 003 - January 2021 | SmithsEP.co.uk | 1...
Contents Declaration of conformity Introduction EC Declaration of conformity Declaration of conformity We, Smith’s Environmental Products Limited 1-2 Blackall Industrial Estate Symbols used in this guide South Woodham Ferrers Important safety and installation instructions 3/4 Chelmsford Application Essex CM3 5UW Tel: 01245 324900 Fax: 01245 324422 Product Information Installation...
Symbols This manual contains information and prescriptions marked by the following symbols: Ignoring these safety High temperature Ignoring these safety provisions marked by surface. provisions marked by the symbol “caution: Take utmost care the symbol “caution: electricity” may to prevent people hazard”...
Important safety and installation instructions Prior to installation, read these installation and operating instructions. The installation and operation should also be in accordance with national regulations and accepted codes of good practice. 6. Electrical connection IMPORTANT: Connection to the power supply must be effected by means of a fixed power cable which is fitted with a plug-type connection or a two pole isolating switch with a minimum contact opening of 3 mm.
Product performance Installation Preparation a) Ensure the mounting surface is capable of supporting this heater appliance and that the area can provide the installation clearances shown in diagram 1. centres Multiple positions (14) for suspension points Pattress b) If installing this heater appliance into a false or suspended ceiling, suitable suspension chains Wall controller or rods (6 mm dia., threaded) will be required...
Page 6
This heater appliance may 6. Replace the fascia and ensure it is secured with all the original screws. be mounted in the following methods Unit Operation To mount the heater appliance direct to Please note: This heater will NOT function without the ceiling the wall mounted wireless controller (supplied) .
Page 7
to power cables, motors or equipment producing strong electromagnetic field. If the temperature control feature is used it is necessary to use one controller for each room or zone. Pairing controller with heaters In order to pair your appliance with the controller: 1.
Electrical Connection Heat Emitter Connect the mains electrical supply cable (3 core, single strand 2.5mm²) via a switched fused isolator, fused at 20A to the heating appliance. Do not energise the supply until the panels described have been returned and secured. The electrical supply to this product should be via 2.5mm²...
CT4E Grille fixing • Align grille panel to heater unit and secure in position with all 9 screws provided. • Ensure the grille panel is flat and free from distortions. Do not disturb the inner components of the heater unit 3 x 2cm 3 x 2cm 3 x 2cm...
Caspian Skyline ® User manual Skyline E 4kW - SLVT B Issue 003 | January 2021 ENGLISH | UK | IRL | SmithsEP.co.uk Issue 003 - January 2021 | SmithsEP.co.uk | 11...
Important safety and installation instructions Please read this user manual before operating this appliance. The operation should also be in accordance with national regulations and accepted codes of good practice. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
How it works How to operate Cooler air is drawn in by the fan and heated as it 1. Before switching the heater on, please ensure passes through the heating element before being the fascia grille is free from obstruction. discharged gently back into the room.
Wall Controller Operation Temperature Control Mode Temperature control for Comfort period (COMF) The controller is primarily designed to minimise Switch 1 controls the display screen. If it is set to energy wastage and ensure the room is ’ON’ the temperature is displayed as Fahrenheit. maintained at the comfort level set by the user.
Page 15
Temperature control for Setback (SETB) which will alter the time period for each segment. For this mode, the switches are set as shown Switch 3 - Each time period represents 5 minutes below. Switch 4 - Each time period represents 15 minutes In this mode, the controller will set heating active Switch 3 &...
Fault finding This Space Saver is covered by a free 5-year parts and labour guarantee. Please refer to the Fault finding table below for advice. In the event of difficulty, please contact us on +44 (0) 1245 324560. Fault Checking/Solution Check the power supply is switched ON Check fuse in fused spur Check the fan is switched on...
Registering your product Disposal As part of the policy of continuous product Thank you for purchasing a Smith’s product. It has improvement, Smith’s Environmental Products LTD been designed and manufactured to the highest reserves the right to alter specification without quality standards to ensure it gives you efficient prior notice.
Page 20
Happy to help To view the full product information download the datasheet at: Smith’s Environmental Products Ltd is one of the leading manufacturers of heating and cooling www.SmithsEP.co.uk products in the UK. We are committed to achieving the highest standards and our faith is For product information, customer services or supported by a free parts and labour guarantee sales support call us on +44 (0) 1245 324900...