Siemens D981 Technical Manual page 28

Additional Options
>&WUO@ >&WUO@ >$@ >$@
Display +
This option determines whether the
Press <Ctrl> <A> for SCSISelect (TM) Utility!
message appears on your screen during system startup.
If this setting is disabled, you can still invoke the SCSI Setup by pressing
at system startup.
The message is displayed during startup (default entry).
Enabled
The message is not displayed during startup.
Disabled
Multiple LUN Support
This option determines whether booting from a SCSI device that has multiple
LUNs (Logical Unit Numbers) is supported.
The SCSI device will be used as the startup drive.
Enabled
The SCSI device will not be used as the startup drive (default entry).
Disabled
BIOS Support for Bootable CD-ROM
This option determines for booting from a CD-ROM drive. The CD-ROM must
emulate a floppy disk or hard disk drive.
It is possible to boot from the CD-ROM (default entry).
Enabled
It is not possible to boot from the CD-ROM.
Disabled
BIOS Support for Int 13 Extensions
This option determines whether the SCSI BIOS supports disks with more than
1024 cylinders. The default setting is Enabled.
Hard disk drives with more than 1024 cylinders are supported
Enabled
(default entry).
Hard disk drives with more than 1024 cylinders are not supported.
Disabled
28 - English
Message During BIOS Initialization
SCSI Setup
>&WUO@
>&WUO@
+
A26361-D981-Z120-9-7419
>$@ >$@