Contents; Trademark - Sony HDS-7150 Installation Manual

Contents

Trademark

6
This manual is organized by following sections.
Section 1 General Information for Installation
This section describes the operating environment, power supply, and example of
system connection.
Section 2 Installation of HDS-7150/7100
This section describes the external dimensions, rack mounting, connectors, input and
output signals of connectors, removing the front panel, removal of parts on the front
side, and description of switches and LEDs on boards.
Section 3 Installation of HKDS-7695/7695A
This section describes the external dimensions, rack mounting, notes when using
HKDS-7695/7695A without rack-mounting, connectors, input and output signals of
connectors.
Section 4 Installation of BKDS-7017
Section 5 Installation of BKDS-2010
Section 6 Installation of BKDM-3010
These sections describe the external dimensions, installing in console (BKDS-7017/
2010), connectors, input and output signals of connectors, description of switches
and LEDs on boards, replacing the switch tips (BKDS-7017/2010), and installing
the track ball (BKDM-3010).
Section 7 Installation of Options
This section describes the installation slot of plug-in boards, plug-in boards list, and
installation of optional boards and units.
Section 8 Adjustment of Secondary Power Supply Voltage
This section describes the power supply voltage adjustments required after connect-
ing all the products which constitute HDS-7150/7100 system.
Section 9 Set-up of HDS-7150
Section 10 Set-up of HDS-7100
These sections describe the overview of setup operation, installation of program,
setup, saving the setup data to nonvolatile memory.
Trademarks and registered trademarks used in this manual are follows.
. Microsoft is a registered trademark of Microsoft Corporation.
HDS-7150/7100