Xerox Versant 280 Press Quick Start Manual page 31

Hide thumbs Also See for Versant 280 Press:
Table of Contents

Advertisement

6. Grab the Release Handle and pull the Drum Drawer straight out.
7. Remove the old drum cartridge by holding the finger rings provided at both ends of the drum
cartridge and gently lifting up.
Caution:
Drums are light sensitive. Do not leave the Drum Cartridge Drawer open for more
than one minute when replacing cartridges. Exposing the drum cartridges to direct sunlight
or strong light from indoor fluorescent lighting for more than one minute can cause image
quality defects.
8. Install the new drum cartridge into the press following the guides with the side marked front
facing the front.
Maintenance
Xerox
®
Versant
®
280 Press
Quick Start Guide
31

Advertisement

Table of Contents
loading

Table of Contents