48
C
3: C
HAPTER
ONFIGURING THE
Enabling Access
Control Based on
MAC Address
A
P
CCESS
OINT
4 Click Browse, and then browse to the location of the text-based access
control list.
Figure 23 Uploading the Text File That Lists the Trusted MAC Addresses
5 Click the text file, and then click OK.
6 Click Upload File.
The MAC addresses in the text file appear on the Access Control tab,
indicating that this information has been successfully saved on the Access
Point.
After defining the access control list, you need to enable the access
control function of the Access Point.
Before performing this procedure, make sure that the MAC address or
addresses of the admin computer is included in the access control list.
Otherwise, you will no longer be able to access the Web interface after
you enable the access control function.
1 On the Access Control tab, select the Enable Access Control by MAC
Address check box.
2 Click Save.