Table of Contents
Advertisement
Setting Up.
3. Mount the Device.
Attach your device to the included mount and use suction cup base to adhere your device to your
vehicle's windshield (or dashboard).
For best image quality, mount your device as follows:
1. Clean the area of the windshield where you intend to mount the device. Attach the mount to
the device by inserting the camera lens through the centre opening of the mounting plate.
Magnets will ensure proper alignment.
2. Peel the plastic cover off and press the suction cup firmly in place. Rotate the knob in
the clockwise direction (
) to secure the device in place; rotate in the counterclockwise
direction (
) to release the mount from the windshield.
3. Adjust the camera angle as necessary. Connect the power cable to complete installation.
1
2
1
WARNING:
Observe local laws and regulations regarding proper mounting of devices.
3
2
Advertisement
Table of Contents
