Advertisement
Note 1B • Entering Lists (continued)
You can also enter a list into the Home screen without storing it in a stat list.
Naming a List
If you name a list, then you can save it for later use. To name a list, highlight the
name of any list, for example
will appear to the left of the list you highlighted. Enter a name for the list, for
example,
. (The flashing
YEAR
you want to enter a number as part of the name, you can just enter the list
name.) Press
and you will see that the list now has a name.
ENTER
Resetting a List
To reset the calculator so that only lists
and select
. This action will not delete a named list from the
5:SetUpEditor
calculator's memory and you will still be able to recall a named list with its
stored data.
Deleting and Archiving a List on the TI-83 Plus or TI-84 Plus
To delete a list, press
2nd
[MEM]
the list you want to delete, and press
list. If you delete a list, you lose the data in the list. To avoid losing the data, instead
of pressing
, you can press
DEL
archiving and will temporarily disable the list(s) you mark. An archived list will
not appear on the screen when you press
can see that each archived list is preceded by an asterisk. An archived list retains
its data but cannot be used until it is enabled. To enable an archived list, press
(
[MEM]
Mem Mgnt/Del...
2nd
2
press
. The asterisk disappears. Press
ENTER
©2007 Key Curriculum Press
,
, and so on, and press
L
L
1
2
tells you that you are in Alpha mode, so unless
A
through
L
L
1
6
, select
2:Mem Mgnt/Del...
. You can delete a pre-set list or a named
DEL
to mark the list with an asterisk. This is called
ENTER
STAT
1
(Edit...)
)
, arrow to the list you want to enable, and
(List...)
4
to return to the Home screen.
[QUIT]
2nd
Discovering Algebra Calculator Notes for the Texas Instruments TI-83 and TI-83/84 Plus
. A new list
[INS]
2nd
are displayed, press
STAT
, and then
arrow to
4:List...,
. By pressing
you
2nd
[LIST]
TI-83 and TI-83/84 Plus
(continued)
9
Advertisement
