3Com OfficeConnect 3CRWE41196 User Manual page 24

24 C 3: R
HAPTER UNNING THE
S W
ETUP IZARD
7 If the password is correct, the Country Selection screen appears. Select
the country you wish to configure the Access Point for, then click Apply.
(Figure 9).
This screen is only displayed on initial configuration of the Access Point.
Figure 9 Country Selection Screen
8 When you have logged in and selected a country either:
The Welcome screen will appear
■
and click Wizard.
or
If your Access Point has not been configured before, the Wizard will
■
launch automatically (refer to
9 Click Next.
10 You will be guided step by step through a basic setup procedure.
(Figure 10). Select the Wizard tab
Figure 11).