Rear Panel - 3Com OfficeConnect 3CRWE41196 User Manual

16 C 1: I
HAPTER NTRODUCING THE

Rear Panel

A P
CCESS OINT
The rear panel (Figure
reset button, an MDI/X switch and a power adapter socket.
Figure 3 Access Point - Rear Panel
5 Wireless Antennae
The antennae on the product should be placed in a 'V' position when
initially installed.
CAUTION: Do not force the antennae round further than 90 degrees in
either direction.
6 Power Adapter Socket
Only use the power adapter supplied with this Access Point. Do not use
any other adapter.
7 Ethernet Port
Use the supplied patch cable to connect the Access Point to the LAN. The
port will automatically adjust to the correct speed and duplex.
8 Reset Button
This button allows you to reset the unit to factory defaults.
9 Uplink/Normal Switch
This switch affects the operation of the Ethernet Port. If you are
connecting the Access Point to a Hub or a Switch, set the switch to
Uplink (in). If you are connecting to a PC, set the switch to Normal (out).
3) of the Access Point contains one LAN port, a