18
C
3: S
HAPTER
ETTING
Windows 95/98/ME
Macintosh
PPPoE Client Software
U
Y
C
P
OUR
OMPUTERS
Figure 7
7 Restart your computer.
1 From the Windows Start Menu, select Settings> Control Panel.
2 Double click on Network. Select the TCP/IP item for your network card and click on
Properties.
3 In the TCP/IP dialog, select the IP Address tab, and ensure that Obtain IP address
automatically is selected. Click OK.
If you are using a Macintosh computer, use the following procedure to change
your TCP/IP settings:
1 From the desktop, select Apple Menu, Control Panels, and TCP/IP.
2 In the TCP/IP control panel, set Connect Via: to "Ethernet." From the list, select
"Ethernet."
3 In the TCP/IP control panel, set Configure: to "Using DHCP Server."
4 Close the TCP/IP dialog box, and save your changes.
5 Restart your computer.
If you have PPPoE client software installed on your computer, you will need to
disable it. To do this:
1 From the Windows Start menu, select Settings > Control Panel.
2 Double click on Internet Options.
3 Select the Connections Tab. A screen similar to Figure 8 should be displayed.
4 Select the Never Dial a Connection option.