Table of Contents
Advertisement
Blind Transfer
Direct Mail Transfer
Establishing a
Conference Call
Using Feature
Codes
In a blind transfer, you transfer the call without notifying the recipient:
1 While on a call, press the Xfer button. The system places the call on hold
and selects a new line.
2 Dial the number to which you want to transfer the call.
3 As soon as you hear a full ring, press the Xfer button and hang up.
If you press the Xfer button too soon after you dial the number, the
transfer might not occur.)
You can transfer a call directly into another user's voice mailbox. The call
does not ring on that user's telephone.
Calls transferred to a user's mailbox by means of Direct Mail Transfer are
always directed into that user's voice mailbox, even if the recipient has
specified a different call coverage point.
On a 3Com Cordless Telephone:
1 While you are on a call, press Feature + 441.
2 Dial the voice mail extension to which you want to transfer the call.
3 Hang up the handset.
You can establish a Conference Call with up to four parties, including
yourself. You must be using a telephone on the NBX system to establish
the call. The other three parties can be any combination of internal and
external parties.
From a 3Com Cordless Telephone, follow these steps:
1 Dial a call, or receive a call from someone else. Two parties are now on
the call.
2 While on the call, press Feature + 430. The system selects a new line and
places the first party on hold.
Establishing a Conference Call Using Feature Codes
61
Advertisement
Table of Contents
