Table of Contents
Advertisement
6.2
Micro-SIM Card
The conga-IC175 offers a micro-SIM slot on connector X11 for inserting SIM card.
Table 37
Connector X11 Pinout Description
Pin
Signal
Description
C1
PWR
Power
C2
RST
Reset
C3
CLK
Clock
C4
N.A
Not available
C5
GND
Ground
C6
VPP
Programming voltage input
C7
I/O
Data
C8
N.A
Not available
Note
1. The micro-SIM card slot is connected to the UIM interface of the M.2 slot by default.
2. The slot can optionally be connected to the UIM interface of the mPCIe slot.
Connector Type
X11: Micro-SIM card socket (Molex 78800 series)
6.3
Micro-SD Card
The conga-IC175 offers a micro-SD slot on connector X60. The SD card slot complies with SDXC card specification 3.0 with support for up to
104 MBps data rate.
Table 38
Connector X60 Pinout Description
Pin
Signal
1
SD_D2
2
SD_D3
3
SD_CMD
Copyright © 2017 congatec AG
Description
Data line (bit 2)
Data line (bit 3)
Command response
Micro-SD Slot (Connector X60)
ICKLm11
SIM Slot - Connector X11
47/56
Advertisement
Table of Contents
