Motorola TETRA MTM800 Manual page 235

Sending a text message during a Group Call
(if configured)
Press
• The call started before message editing began — The
terminal will leave the call and send the message. If the
call is still active, the terminal will re-join it.
• The call started after message editing began — The
terminal will leave the call and send the message. The
terminal will return to edit mode.
• The call started before or after message editing began —
The terminal will send the message while staying in the
call.
Sending a text message during Emergency/Broadcast
Call (if configured)
Press
• The call started before message editing began. The
terminal will leave the call and send the message. The
terminal will return to edit mode.
• The call started after message editing began. The terminal
will send the message while staying in the call.
Receiving a Private/Phone/PABX Call during text mes-
sage editing
Message editing is automatically interrupted and restored
after that call.
Entering the Outbox
Press
Menu
The Send Msg sub-menu is displayed.
Editing, Storing, and Sending a New Message
1. Scroll to
You are allowed to type/edit your message using the key-
pad. Refer to "Editing the Text" on page 15.
. One of the following might occur:
. One of the following might occur:
– 1 Messages – 3 Send Msg
and press
1 New
.
. An empty screen will open.
Ok
1 New
2 Templates
3 Predefined
Back
Ok
105