Scan - Motorola TETRA MTM800 Manual

Scan

( 7)
Menu
To enter the sub-menu, press
This sub-menu allows you to activate/deactivate scanning,
view the active scan list, and edit the scan lists.
It is not possible to enable or disable Talkgroup scanning in TXI
Mode.
Setting Talkgroup Scanning (
To enter the sub-menu,
press
Menu
This sub-menu allows you to activate/
deactivate the scanning of a list of
predefined talkgroups programmed in the MTM800. The
MTM800 will join any talkgroup call as long as this talkgroup
is defined in the scan list and scan is turned on.
Scroll to the desired setting and press
If it is set to Off, display shows the
following state:
When set to
following state:
• The last selected scan list, or
• the first list in the scan lists.
To select a list other than the one shown,
scroll through the scan lists and press
To change your selection:
• Select
or
• Enter Group mode and select
A message indicating that all scan lists are empty.
Select
3 Scan Lists
When set to
Menu
– 7 Scan – 1 Scanning
, the display shows the
On
Menu – 7 Scan – 1 Scanning – 1 SelectList
to fill the scan list(s). See page 94.
scanning is deactivated.
Off
,
.
– 7 Scan
Menu
7 1)
1 Scanning
.
2 Active List
3 Scan Lists
Back
Ok.
1 On
2 SelectList
Back
1 Off
2 SelectList
Back
Scan List:
.
Set
Scan List 1
Back
Optns – Scan – 1 SelectList
Ok
Ok
Ok
Set
,
.
93