Panasonic SA-AK230GC Service Manual page 34

Table of Contents

SA-AK230GC / SA-AK230GN

Step 5 Remove the flywheel R.

Step 6 Release the claw of tape side, and then remove the

winding lever and spring.

Step 7 Remove the flywheel F.

[Installation of the belt]

Step 1 The boss and marking should be positioned

horizontally.

Step 2 Put the winding belt on the pulley temporarily.

Step 3 Install the flywheel F.

Step 4 Put the winding belt on the flywheel F.

Step 5 Install the winding lever and spring while pressing the

winding arm in the direction of arrow.

Step 6 Install the flywheel R.

Table of Contents

Sa-ak230gn