3Com IntelliJack NJ1000 Quick Start Manual page 13

3 Pull the NJ1000 down to lock the hooks tightly into the slots. Be sure
to match the screwholes in the bracket and the NJ1000. Secure the
NJ1000 using the T-10 torx screw that came in the NJ1000 package
8. Connect the Local Power Supply (Optional)
If the network does not support PoE, you can use the optional local power supply. To
connect the local power supply to the NJ1000, follow these steps:
1 Connect the round connector of the local power supply to the
NJ1000 (as shown in the next diagram).
2 Plug the power cord of the local power supply into an AC outlet.
WARNING: Use only the local power supply available from 3Com. Failure to do so
may result in damage to the NJ1000 or may result in a hazardous situation.
13