3Com IntelliJack NJ1000 Quick Start Manual page 10

NOTE: If you are installing the NJ1000 into a wall junction box, make sure that there
is enough space between the back of the NJ1000 and the inside of the junction box
to maintain an acceptable bend radius on the cable.
To ensure proper horizontal cabling functionality, adhere to the following
■
network cabling standards during installation:
ANSI/TIA/EIA-568
■
Commercial Building Telecommunications Cabling Standard
ANSI/TIA/EIA-569
■
Commercial Building Standard for Telecommunications Pathways and Spaces
4. Attach the Wall-Mount Bracket
Attach the included wall-mount bracket to the wall opening as shown in this
diagram.
10